Flue Gas Desulphurization Pump, Fgd Gypsum Slurry Pump

• Customization: Available
• Max.Head: 50-80m
• Max.Capacity: >400 L/min
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump
• Theory: Centrifugal Pump
• Stage: Single
• Casing: Single Casing Pump
• Color: Any
• Transport Package: Wooden Crate
• Specification: SGS, CE, ISO
• Trademark: Sunbo/OEM
• Origin: Shijiazhuang, China
• HS Code: 841370
• Production Capacity: 5000

Product Description

FGD pump is single stage, single suction horizontal centrifugal pump. It is mainly used as the circulating pump for absorption tower in FGD system in Power Plant. The wet parts are designed with the CFD Fluid Simulating Analysis Technology to ensure its high-efficiency operation. The position of impeller in the pump internal can be changed by adjusting the bearing assembly, which can ensure the pump to run efficiently. The pump design adopts back pull-out structure, which is easy to disassemble and without need to remove the inlet and outlet pipeline.

Features:
1. The bearing at pump end is double-row taper roller bearing, and bearing at drive end is cylindrical roller bearing. The bearings are lubricated with oil to longer the service time.
2. The special integrated mechanical seal design is suitable to Thermal Power Plant Fuel Gas Desulphurization process.
3. Frame plate, cover plate and joint plate are made of ductile cast iron to maximum the pressure-loaded bearing capacity.
4. Material of the FGD pump mainly is duplex phase stainless white iron and natural rubber. The duplex phase stainless white iron also names as A49, 28% Cr, corrosion resistant suitable for low pH (less than 4) duties, where erosive wear is also a problem, ensure pump long-life operation term.
 

Type	Capacity (m 3 /h)	Head ( m )	Speed ( r/min )	Maximum efficiency η(%)	NPSH (m)	Outlet diameter (mm)	Inlet diameter (mm)
350X-TL(R)	1600	25	960	82	4.5	350	400
400X-TL(R)	2500	25	725	83	5.0	400	450
500X-TL(R)	3750	25	725	85	5.0	500	500
600X-TL(R)	6300	25.5	620	88	5.5	600	700
700X-TL(R)	6840	26	485	87	6.0	700	800
800X-TL(R)	9360	31	485	90	7.0	800	900
900X-TL(R)	15000	30	485	90	8.5	900	1000
1000X-TL	10440	15	485	89	7.0	1000	1200