We stock huge quantity of spare parts of slurry pump to make sure fast delivery and to meet urgent needs of our clients. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
| Material Code |
Applications |
Remark |
| SG01 |
Casing, Frame, Bearing housing, Stuffing box, Stuffing Gland |
Grey Iron |
| SD21 |
Casing, Frame, Bearing housing |
Spheroidal Graphite Cast Iron |
| SA05/SA33 |
Impeller, Volute, Expeller, Throat bushing, FPL, Expeller Ring |
High Chrome Alloy |
| SA49 |
Impeller, Volute, Throat bushing, FPL |
|
| SR26/SR33/SR55 |
Impeller, Volute, Throat bushing, FPL |
Rubber |
| OEM Material |
Special material for pumps and pump parts are available according to clients chemical component request |
Slurry Pump Spare Parts
Slurry pump wet end parts mainly include Impeller, volute liner, Casing, shaft, throat bush, wear plate, case, cover, stuffing box, lantern restrictor, cover plate bolt, throat bush, shaft sleeve, cover plate liner, frame plate liner...
1.centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer elastomer elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.
4.Wear -resistant Metal Liner and Rubber Liner available
5.Seal Type: gland seal , expeller seal and mechanical seal
6.Can be installed in multistage series
7.easy to maintenance
The properties of the rubber material:
We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.
Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Audited Supplier 
){kind=link}
){kind=link}